Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Other

$35.00
Hurdy Gurdy is another nifty device that keeps a rear wheel from slipping forward in the dropout under pedal load. It's designed for the Cross-Check's semi-horizontal front-loading dropouts, and will also work on many other similar dropouts. Hurdy Gurdy is investment cast of stainless steel for durability and good looks, and shares many of Tuggnut's design features. Its two axle holes allow for a wide variety of fore/aft wheel positions, it will work with standard QRs, bolted axles, and nutted axles up to 10mm.

$17.99
Attach these lightweight brackets to your water bottle bosses to serve as anchors for your cargo straps to carry just about anything, from sleeping pads to Nalgene bottles to barbeque sauce. These are a great addition to any bikepacking or touring cyclist’s on-bike storage toolkit. And their low profile means they don’t mess up the looks of your bike build while not in use.

$59.00
The tool-free Maxle Lite brings exceptional stiffness and durability to your fork in a light, easiest-to-use expanding wedge thru-axle system.
- Thread Length: 9mm
- Thread Pitch: 15 x 1.5mm

$9.99 - $12.99
The Problem Solvers Handlebar Clamp Shim allows you to fit almost any handlebars in almost any stem. It's machined of light and durable aluminum and grooved on the inside to hold tightly.

$19.99
Shimano's In-Line Brake Cable Adjuster with quick release allows you to make changes to your road caliper brake's cable tension or open a brake caliper's arms to remove a wheel.

$24.99
The Problem Solvers Cross Clamp mounts to the seat tube on your frame so that you can make your top-routed shift cables work with a bottom-pull front road derailleurs. This is a common setup on cyclocross bicycles. Choose the diameter that matches your frame.

$15.00
Surly wants you to be able to set up you ride just the way you want it. This pair of adapter washers make it so you can throw your favorite 135, 170, or 190mm O.L.D. 10mm solid axle hub into the rear end of a 142, 177, or 197mm spaced thru-axle frame. Add the adapters, add the wheel, install and tighten the nuts and, bam, you're ready to rip.
Make sure the solid axle on your wheel is the right length for the frame spacing. For instance: 190mm OLD QR goes with 197mm thru-axle spacing.

$49.99
These simple clamps allow riders to mount I-Spec II compatible shifters or dropper levers onto their bars without the otherwise-requisite Shimano I-Spec II compatible brake levers. Sold individually and can be used for either right- or left-hand side.
- Hinged clamps for easy installation without removing other components
- AL-6061, anodized black
- 23 grams
- For use only with I-Spec II compatible shifters or dropper lever

$9.95
$10.00
1% Off
Keep the weight down and your headset snug with the Specialzied Carbon Steerer Tube Plug.

$10.00
One of the coolest things about Surly is if they can't find an existing part that fits their standards, they just make one themselves. This cable hanger is made to fit around the oversize bolt on their Constrictor seatpost clamp so you can be sure it will fit around almost any other seatpost clamp bolt too. It comes complete with an adjusting barrel.

$20.00
Whether for derailleur clamp clearance, tire clearance, or personal preference, sometimes it can be advantageous to run the wheel further back in the dropouts. Monkey Nuts install into Surly horizontal dropouts to make spacing the wheel back easy. There are 3 different sets depending on the type of dropout and axle configuration the dropout is intended for. Simply select the correct version of Monkey Nut, install it into the frame, and slam the wheel all the way forward. Bang, done.

$50.00
Turn your geared bike into a singlespeed machine with Surly's Singleator. The Singleator mounts to your derailleur hanger and provides a smooth, quiet and adjustable means of tensioning the excess chain slack on any bike. It's made from strong forged steel and features a triple-sealed spring, large-cog capacity, chain guides, fully-adjustable chain line, floating pulley, and a stainless-steel pivot bushing. And, it works with both BMX and standard chains.

$122.00
Giant's Connect SL S-Bend Carbon Aerobar Extensions are for use with Giant's Clip-On Aerobar Clamps (sold separately). This model features the S-Bend. Thanks to carbon construction, these are featherweight and super-stiff extension bars. Plus, they have 70mm of fore/aft adjustment to dial in your ideal aero position.

$21.00
Rated fully KICKASS by a very authoritative entity who will remain unnamed, Surly's cast and polished stainless steel clamps won't rust or chip paint because they can't (even the black ones!). They're shiny! They look good! And most importantly, they deliver the clampability seatposts crave.

$12.75
- Dust-proof and waterproof rubber seal cover.
- Protect the power source connection on the frame when the e-bike is parked outside or when you carry it without the EnergyPak.

$50.00
The All-City Master Dropout is a sliding dropout system consisting of replaceable dropout plates and fixing hardware. Designed for use with 12mm thru-axles and flat-mount brakes, it is compatible only with select All-City models.
- Allows riders to convert from a geared to single-speed setup or vice-versa
- Compatible only with select All-City models
- No additional chain tension adjustment required
- Threaded cap / nut for axle installation
- Cap nut and O-ring included
- Use with drive-side plates

$30.99 - $61.99
Sport brake housing packs high performance features into a colorful and durable package, making it a functional and aesthetic upgrade.
- Slick-Lube lined housing reduces friction for faster cable movement and better braking response
- High carbon internal steel coil for improved stiffness
- Appropriate for Teflon coated cables as well as steel and galvanized
- Length: 10m

$10.00
A five-piece IGUS bushing spacer kit for mounting rear shocks.
- Compatible with x eyelet shocks using IGUS bushings mounted in the shock eyelet
- Select the correct hardware kit for your mounting bolt diameter (e.g. 6mm, 8mm) and frame mount width (e.g. 22mm, 24mm)

$75.00
Original equipment ceramic bearing pulleys for SRAM rear derailleurs.
- Chain Compatibility: SRAM XX1

$20.00
A seatpost retention plug that holds an electronic shifting system battery securely inside ENVE carbon seatposts. Electronic shifting is the gold standard and more bikes are coming equipped with these groups. Housing the battery into the seatpost is an elegant solution and a good use of space. Available in 25.4, 27.2, and 30.9/31.6mm sizes, these plugs are designed to provide excellent battery retention and interface perfectly with ENVE carbon seatposts.

$24.99 - $44.99
The Problem Solvers Head Tube Reducers resize your head tube to accommodate different size forks. These fine aluminum reducers are designed for traditional, external-cup headsets. Please contact us for any questions about compatibility with your bicycle.

$27.99
The Problem Solvers Travel Agent amplifies your braking power so that you can mix road, mountain and cyclocross brakes and brake levers. Instead of buying new levers or brakes, just install a Travel Agent and you're good to go. This trick gizmo is made of quality 6061 aluminum and is available with and without a built-in adjustment barrel. It works with cantilever brakes, road dropped handlebars, and Shimano STI and Campagnolo Ergopower levers.

$34.99 - $69.99
ReMatch adapters are designed to integrate different generations of Shimano Brakes to Shimano Shifters. Rematch Adapter 1.2 connects Shimano I-Spec A/B brake to I-Spec II Shifter.
- Made from CNC Machined T6061 Aluminum
- Anodized Black
- Includes all necessary hardware for both I-Spec A and I-Spec B brake
- No additional hardware needed

$17.99
The Problem Solvers Braze-On Front Derailleur Adapter simply clamps onto your frame's seat tube and provides a secure place to bolt on your braze-on front derailleur (sold separately). This fine adapter is made of light, durable aluminum and includes a stainless-steel bolt.

$39.99
The Problem Solvers GXP Spindle Adapter Kit lets you adapt a GXP crankset to a BB30 or Press-Fit 30 bottom bracket. It's used with the Problem Solvers BB30/Press-Fit 30 Adapter Kit, which is sold separately.
Page 1 of 62
Next page