Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Chainrings
$21.00
Replacement PowerGlide ring for 11 speed crankset.
- Compatible with Asymmetrical Yaw front derailleurs
- Bolt Circle Diameter (BCD): 110 BCD
- Material: Aluminum
$18.99 - $26.00
SRAM's road chainrings are stamped from 7075 aluminum for low weight and excellent strength. The teeth are ramped for precision shifting, too.
$165.00
Shimano Ultegra 6800 11-Speed Inner Chainrings
- Material: Aluminum
- Ring Position/Type: Inner
$113.08
TruVativ XX Short Pin Chainrings for BB30 Cranks, use with 26T
- Ring Position/Type: Inner
- Drivetrain Speeds: 10
- Chainring BCD: 120
- Material: Aluminum
$69.00 - $99.00
Intense study of chain and chainring wear patterns led to the radical tooth profile that lasts longer, runs quieter and further improves chain retention.
- Can be used with Eagle 12 speed or SRAM 11 speed chains
- Direct mount rings with 3mm offset fit Boost geometry Eagle cranks; direct mount rings with 6mm offset fit traditional geometry Eagle cranks and GXP spindle XX1, X01, X0, X1 and X9 cranks
$21.00
The SRAM X-Sync Steel 1x chainrings are the perfect replacement ring for the cost conscious with added durability of steel. The same SRAM X-Sync technology at a price well below competitors’ imitation “narrow wide” rings. Best performing chainrings at the best price.
- Compatibility: Compatible with all SRAM 1x cranks, DM 28-tooth ring is not compatible with 30mm cranks that require a 0mm offset ring
Original equipment on SRAM and Truvativ cranks, they also work well with other drive trains.
- 7000 series aluminum provides strength and durability
$79.95 - $84.95
More power, better traction, less shifting. Wolf Tooth oval chainrings use our proprietary PowerTrac design that has all the benefits of oval, but without the funky, uneven pedal stroke. Ride one once and you'll wonder why you waited so long to try oval.
Think of an oval chainring as two chainrings in one. A major benefit of oval is how the shape of the chainring alters your gearing in two important phases of your pedal stroke by harnessing your body's natural biomechanics. Here's how it works. The area of the chainring with the larger diameter engages with the chain at the optimal point on the downstroke, which is what's known as the Power Zone. If you were to look at a clock, the Power Zone would be between 1-5 and 7-11. Conversely, the Recovery Zone – back to the clock face, between 11-1 and 5-7 – is the weakest part of the pedal stroke, when the oval maximizes your efficiency. A 34T oval chainring behaves like a 36T chainring when you want power, while behaving like a 32T chainring when you're climbing.
We've also engineered our oval chainrings to provide smoother, more efficient pedal rotation. This equates to better traction because of steadier torque on the rear wheel. With a Wolf Tooth oval chainring, you can harness more of your strength in the Power Zone, while having easier pedaling in the Recovery Zone.
The direct mount chainrings for SRAM cranksets with the 3 bolt mounting interface. They replace your existing spider and chainring with one clean looking, lightweight, and stiff piece of machined billet. They are available in the Drop-Stop B tooth profile, which is optimized for SRAM Flattop chain. It is also compatible with all other 9, 10, 11, and 12 speed chains except Shimano 12spd chain.
Compatibility:
- These direct mount chainrings will replace your existing chainring and spider or replace the direct mount ring on SRAM cranksets including the DUB cranks. The ring is attached via 3 bolts on the back side of the spider near the spindle. Note that these chainrings are NOT compatible with SRAM 8-bolt direct mount cranksets.
- Wolf Tooth's patented Drop-Stop® wide/narrow tooth profile for the ultimate chain retention and mud shedding ability
- There is one offset: Standard Road/CX/Gravel: 6mm offset for cyclocross and road crank applications with 47mm chainline
- Praxis Works Road/CX cranks use the 6mm offset.
- If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention).
Available in multiple tooth profiles for optimal performance based on your chain type. Use Drop-Stop ST for use with Shimano 12-speed Hyperglide+ and 12spd KMC chains. Use Drop-Stop A for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains. Drop-Stop B is optimized for SRAM 12 spd Transmission (T-type) and Road Flattop chains but is compatible with all chains that work with Drop-Stop A.
DROP-STOP B
Compatible 9, 10, 11, and 12s SRAM Eagle, 12s SRAM Transmission (T-type) Flattop, 12s Campy, 12s KMC
Not compatible with 12s Shimano HG+ chains
Recommendations -
- Recommend the use of a clutch style rear derailleur for the best chain security.
- An L-wrench works best since the crank spindle may contact a socket adapter and prevent it from engaging properly.
- Use the same 3 bolts to attach the Wolf Tooth ring or we carry replacement bolts
Tech Specs:
- Weights: 38t/90g | 40t/96g | 42t/104g
- Material: 7075-T6 aluminum
- Made in the USA
$79.95 - $81.95
More power, better traction, less shifting. Wolf Tooth oval chainrings use our proprietary PowerTrac design that has all the benefits of oval, but without the funky, uneven pedal stroke. Ride one once and you'll wonder why you waited so long to try oval.
Think of an oval chainring as two chainrings in one. A major benefit of oval is how the shape of the chainring alters your gearing in two important phases of your pedal stroke by harnessing your body's natural biomechanics. Here's how it works. The area of the chainring with the larger diameter engages with the chain at the optimal point on the downstroke, which is what's known as the Power Zone. If you were to look at a clock, the Power Zone would be between 1-5 and 7-11. Conversely, the Recovery Zone – back to the clock face, between 11-1 and 5-7 – is the weakest part of the pedal stroke, when the oval maximizes your efficiency. A 34T oval chainring behaves like a 36T chainring when you want power, while behaving like a 32T chainring when you're climbing.
We've also engineered our oval chainrings to provide smoother, more efficient pedal rotation. This equates to better traction because of steadier torque on the rear wheel. With a Wolf Tooth oval chainring, you can harness more of your strength in the Power Zone, while having easier pedaling in the Recovery Zone.
Compatibility:
- These rings fit on the Shimano XT M8000, SLX M7000, Deore M6000, or FC MT5100 1x or 2x cranksets.
- Use only the stock Shimano XT M8000 or SLX M7000 chainring bolts
- These CAN be mounted to the XTR 9000 series cranks, but you will have to use the bolt caps that come with that crankset and you will need to file roughly 1mm off the threaded boss on each bolt cap (they are a little too long and don't allow the ring to be tightened down)
- Wolf Tooth's patented Drop-Stop® wide/narrow tooth profile for the ultimate chain retention and mud shedding ability
- If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention).
- Provide a great chainline on most boost bikes. See this explanation for details.
- Drop-Stop A models will reduce the chainline (inward towards the frame) from the Shimano specified chainline for the crankset: 26T-28T = -3mm, 30T-34T = -2mm, and 36T-38T = -1mm
- Drop-Stop ST models will have the same chainline as the Shimano specified chainline
- Must use the stock chainring bolts. The Wolf Tooth chainring bolts are a different size.
- Ovality of 10% and timing of 112° after TDC (top dead center)
- Maximum diameter is that of a chainring 2t bigger than the size you order so be sure there is adequate chainstay clearance.
- Available in multiple tooth profiles for optimal performance based on your chain type. Use Drop-Stop ST for use with Shimano 12-speed Hyperglide+ and 12spd KMC chains. Use Drop-Stop A for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains. Drop-Stop B is optimized for SRAM 12 spd Transmission (T-type) and Road Flattop chains but is compatible with all chains that work with Drop-Stop A.
DROP-STOP A
- Wolf Tooth Drop-Stop A is the original patented wide/narrow chainring compatible with multiple drivetrain brands including 9, 10, 11, and 12s SRAM Eagle, KMC, Wippermann, etc.
- NOT compatible with 12s SRAM Transmission (T-Type) Flattop, 12s Shimano HG+, or 12s Campy
DROP-STOP ST
- Compatible with 12s Shimano Hyperglide+ chain and 12s KMC chain only
- Symmetric Trapezoidal (ST) tooth shape is optimized for Shimano HG+ chain
Recommendations -
- If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur. Without these precautions, you may experience chaindrops and/or chainsuck.
- Recommend the use of a clutch style rear derailleur for the best chain security.
Tech Specs:
- Weight: 30t/41g | 32t/50g | 34t/59g
- Material: 7075-T6 aluminum
- Made in the USA
$81.95
More power, better traction, less shifting. Wolf Tooth oval chainrings use our proprietary PowerTrac design that has all the benefits of oval, but without the funky, uneven pedal stroke. Ride one once and you'll wonder why you waited so long to try oval.
Think of an oval chainring as two chainrings in one. A major benefit of oval is how the shape of the chainring alters your gearing in two important phases of your pedal stroke by harnessing your body's natural biomechanics. Here's how it works. The area of the chainring with the larger diameter engages with the chain at the optimal point on the downstroke, which is what's known as the Power Zone. If you were to look at a clock, the Power Zone would be between 1-5 and 7-11. Conversely, the Recovery Zone – back to the clock face, between 11-1 and 5-7 – is the weakest part of the pedal stroke, when the oval maximizes your efficiency. A 34T oval chainring behaves like a 36T chainring when you want power, while behaving like a 32T chainring when you're climbing.
We've also engineered our oval chainrings to provide smoother, more efficient pedal rotation. This equates to better traction because of steadier torque on the rear wheel. With a Wolf Tooth oval chainring, you can harness more of your strength in the Power Zone, while having easier pedaling in the Recovery Zone.
Compatibility:
- These rings are for use with Shimano 110 BCD Asymmetric 4-bolt cranks.
- Compatible with Dura Ace 9000, Ultegra 6800, 105 5800, Tiagra 4703 or 4700, Sora R3000 or R3030, and Claris R2000 or R2030 cranks.
- Sizes 40T and larger are compatible with Dura Ace 9100, Ultegra 8000, and 105 R7000 but a slight modification is required due to a change in the crank arm profile. The 38T chainring will not work for this modification. Click here to review the process for the modification, which takes about 5 minutes to perform.
- NOT compatible with Dura-Ace R9200, Ultegra R8100, and 105 R7100 Cranks
- Mounts in the big ring position of the cranks but is offset inward for perfect chainline.
- The stock 2x bolts will not work. You will need our 6mm bolts which are optimized for single ring mounting.
- Wolf Tooth's patented Drop-Stop® wide/narrow tooth profile for the ultimate chain retention and mud shedding ability
- If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention).
- Chainline - 47.5mm
DROP-STOP A
- Wolf Tooth Drop-Stop A is the original patented wide/narrow chainring compatible with multiple drivetrain brands including 9, 10, 11, and 12s SRAM Eagle, KMC, Wippermann, etc.
- NOT compatible with 12s SRAM Transmission (T-Type) Flattop, 12s Shimano HG+, or 12s Campy
DROP-STOP B
- Compatible 9, 10, 11, and 12s SRAM Eagle, 12s SRAM Transmission (T-type) Flattop, 12s Campy, 12s KMC
- Not compatible with 12s Shimano HG+ chains
Recommendations -
- If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur! Without these precautions, you may experience chaindrops and/or chainsuck.
- Recommend the use of a clutch style rear derailleur for the best chain security.
Tech Specs:
- Weight: 38t/66g | 40t/74g | 42t/81g
- Material: 7075-T6 aluminum
- Made in the USA
$79.95
More power, better traction, less shifting. Wolf Tooth oval chainrings use our proprietary PowerTrac design that has all the benefits of oval, but without the funky, uneven pedal stroke. Ride one once and you'll wonder why you waited so long to try oval.
Think of an oval chainring as two chainrings in one. A major benefit of oval is how the shape of the chainring alters your gearing in two important phases of your pedal stroke by harnessing your body's natural biomechanics. Here's how it works. The area of the chainring with the larger diameter engages with the chain at the optimal point on the downstroke, which is what's known as the Power Zone. If you were to look at a clock, the Power Zone would be between 1-5 and 7-11. Conversely, the Recovery Zone – back to the clock face, between 11-1 and 5-7 – is the weakest part of the pedal stroke, when the oval maximizes your efficiency. A 34T oval chainring behaves like a 36T chainring when you want power, while behaving like a 32T chainring when you're climbing.
We've also engineered our oval chainrings to provide smoother, more efficient pedal rotation. This equates to better traction because of steadier torque on the rear wheel. With a Wolf Tooth oval chainring, you can harness more of your strength in the Power Zone, while having easier pedaling in the Recovery Zone.
Compatibility:
- These rings are for use with 110 BCD 5 arm cranksets.
- Crank arm clocking arrow will be rotated 180 degrees from normal on cranksets that have 4 bolts visible and 1 hidden bolt behind the crank arm like for SRAM.
- Wolf Tooth's patented Drop-Stop® wide/narrow tooth profile for the ultimate chain retention and mud shedding ability
- Chainline - varies - these rings can be mounted in either the big or small ring position on a double cranksets. The most common mounting is in the big ring position because of chainstay clearance. The ring centerline is ~2mm from the ring's mounting face so they usually sit about 2mm closer to the frame than the stock big ring (depends on the stock ring)
- Can be mounted in either the big or small ring position of a double crankset given chainstay clearance in the small ring position.
- Stock 2x bolts will not work. You will need bolts like our 6mm bolts which are optimized for single ring mounting.
- Use Drop-Stop B for all SRAM Eagle, SRAM Road and Transmission (T-Type) Flattop chains, 9, 10, and 11spd chains or 12spd KMC, Connex, Wippermann, Campagnolo.
DROP-STOP B
- Compatible 9, 10, 11, and 12s SRAM Eagle, 12s SRAM Transmission (T-type) Flattop, 12s Campy, 12s KMC
- Not compatible with 12s Shimano HG+ chains
Recommendations -
- If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur! Without these precautions, you may experience chaindrops and/or chainsuck.
- Recommend the use of a clutch style rear derailleur for the best chain security.
Tech Specs:
- Weight: 36t/58g | 38t/66g | 40t/74g | 42t/81g
- Material: 7075-T6 aluminum
- Made in the USA
$84.95
Wolf Tooth Direct Mount Chainrings for Trek TQ E-Bike Motors are compatible with all Boost and Super Boost bikes that use the Trek TQ Motor. This brings a lightweight chainring with patented Drop-Stop® technology to e-bike chainrings for the first time. Direct Mount Chainrings for Trek TQ E-Bike Motors are machined with 7075-T6 aluminum at Wolf Tooth in Minnesota, USA.
Compatibility:
- Chainring is compatible with only TQ Motor drive systems
- 55 mm chainline
- Available in two different tooth profiles for optimal performance based on your chain type. Use Drop-Stop ST for use with Shimano 12-speed Hyperglide+ and 12spd KMC chains. Use Drop-Stop B for all 9, 10, and 11spd chains or 12spd SRAM Eagle, SRAM Flattop Road or Transmission (T-Type), KMC, Connex or Wippermann chains.
DROP-STOP B
- Compatible 9, 10, 11, and 12s SRAM Eagle, 12s SRAM Transmission (T-type) Flattop, 12s Campy, 12s KMC
- Not compatible with 12s Shimano HG+ chains
DROP-STOP ST
- Compatible with 12s Shimano Hyperglide+ chain and 12s KMC chain only
- Symmetric Trapezoidal (ST) tooth shape is optimized for Shimano HG+ chain
Tech Specs:
- Weights: 30t/64g | 32t/69g
- Material: 7075-T6 aluminum
- Made in the USA
$238.00
The Shimano R9100 series crankset achieves the ultimate in optimal power transfer. It does this through a more reinforced outer chainring on its unique asymmetrical four-arm spider construction.
- Chainring BCD: 110 Shimano Asymmetric
- Drivetrain Speeds: 11
- Material: Aluminum
- Ring Position/Type: Outer
$12.00 - $30.00
Claris R2000 series 8-speed chainrings are a reliable option for long touring, town cruising, and daily commuting.
- Direct replacement for R2000/R2030 cranks
- Hyperglide technology ensures smooth and reliable shifting
- Compatible with 4-arm crank design
$18.00
- Shimano, 36T, 9 sp, BCD 104mm, 4-Bolt, Deore FC-M590, Middle Chainring, For 26/36/48, Aluminum, Black, Y1LD98090
$24.99 - $54.99
Dimension Chainrings.
- No ramps, pins, or shift aids
$19.00 - $38.00
Shifting performance has helped Full Speed Ahead to become a world leader for high-end chainrings. No one studies the design and manufacturing of each system, and each tooth, as carefully as we do. Our dedication shows in every revolution of the crank, and every perfect shift achieved. To meet or exceed the needs of any drivetrain, Full Speed Ahead has developed sophisticated design, testing and manufacturing protocols. This allows Full Speed Ahead to match your needs as perfectly as our chainrings match a chain. We offer more options, levels, and finishes than our competitors. We use the best materials available, imported from the USA, Europe, or sourced from our qualified vendors in Asia, to guarantee the durability, performance, and appearance will out-perform, and outlast the competition. Full Speed Ahead chainrings have powered multiple World, Tour de France, and Olympic champions, and will exceed your expectations.
- Stamped AL7075/T6
- Chainrings are compatible with all 10-speed drivetrains, and compatible with FSA, SRAM, and Shimano 11-speed drivetrains
- Drivetrain Speeds: 11, 10
$15.00
- Thick-thin tooth design for maximum chain engagement
- Heat-treated forged steel
- BCD: 82mm
- Optimized for 11-12 speed system
- Compatible with Gamma Pro and Alpha Drive 1x crankset
$38.00
True value and performance are found in this chainring. It offers both long wear life and smooth shifting.
- MegaTooth technology for superior chain retention
- Crankset Compatibility: Gossamer Pro AGX+/Omega
- Material: Alloy
- Compatibility: BB386EVO
- Drivetrain Compatibility: Shimano 10/11S, SRAM 10/11S, FSA 11S
$128.00
Rugged durability comes naturally to the XX SL Eagle T-Type direct mount chainring. Finished with a distinct, dual-spoke design your shifting will never be compromised.
- Light weight and incredibly durable aluminum chainring
- 8-bolt direct mount design (Mounting bolts included)
- Compatible with SRAM T-Type chains
$107.00
Rugged durability comes naturally to the XX Eagle T-Type direct mount chainring. Finished with a distinct, dual-spoke design your shifting will never be compromised.
- 3mm offset
- Light weight and incredibly durable aluminum chainring
- 8-bolt direct mount design (Mounting bolts included)
- Compatible with SRAM T-Type chains
$41.00
Replace worn out chainrings or change out gearing with SRAM's RED X-Glide Chainrings. These solid rings are crafted from aluminum using SRAM's X-Glide tooth profiles for quick, responsive shifting. If you have a SRAM RED 10-speed Exogram* standard crank, these are the rings for you. RED Exogram cranks have a hidden 5th bolt behind the crank arm
$91.00
Original equipment on SRAM and Truvativ cranks, these chainrings also work well with other drivetrains.
$69.95 - $86.95
"More power, better traction, less shifting. Wolf Tooth oval chainrings use our proprietary PowerTrac design that has all the benefits of oval, but without the funky, uneven pedal stroke. Ride one once and you’ll wonder why you waited so long to try oval.
Think of an oval chainring as two chainrings in one. A major benefit of oval is how the shape of the chainring alters your gearing in two important phases of your pedal stroke by harnessing your body’s natural biomechanics. Here’s how it works. The area of the chainring with the larger diameter engages with the chain at the optimal point on the downstroke, which is what’s known as the Power Zone. If you were to look at a clock, the Power Zone would be between 1-5 and 7-11. Conversely, the Recovery Zone – back to the clock face, between 11-1 and 5-7 – is the weakest part of the pedal stroke, when the oval maximizes your efficiency. A 34T oval chainring behaves like a 36T chainring when you want power, while behaving like a 32T chainring when you’re climbing.
We’ve also engineered our oval chainrings to provide smoother, more efficient pedal rotation. This equates to better traction because of steadier torque on the rear wheel. With a Wolf Tooth oval chainring, you can harness more of your strength in the Power Zone, while having easier pedaling in the Recovery Zone.
These chainrings are for Race Face Cinch cranks such as Turbine, Next SL, Sixc & Aeffect. The Wolf Tooth Cinch chainrings feature our patented Drop-Stop® tooth profiles for the best wear life, chain retention and mud clearance. We have optimized tooth profiles for SRAM T-Type Transmission, Shimano Hyperglide+, and all 12, 11, 10, and 9-speed chains.
Compatibility
- Any Race Face Cinch™ system crankset (including Next SL, Sixc, Turbine, Aeffect)
- Riders running SRAM Transmission w/ Race Face Cinch cranksets with a Boost 136/137mm spindle use a Cinch direct mount 0mm offset chainring.
- Riders using a Cinch crankset with a Super Boost 151mm spindle use a Cinch direct mount 3mm offset chainring.
- Standard (142mm rear hub spacing) 6mm offset, Boost (148mm hub spacing) 3mm offset, and Boost for T-Type Transmission 55mm chainline 0mm offset are available.
- Use a 3mm offset chainring for Super Boost applications running standard drivetrains or Transmission.
- Wolf Tooth’s patented Drop-Stop® wide/narrow tooth profile for the ultimate chain retention and mud shedding ability.
- For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle)
--- If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention).
- Maximum diameter is that of a chainring 2t bigger than the size you order (so be sure there is adequate chainstay clearance!)
- Chainline 49mm (standard), 52mm (Boost), 55mm (T-Type Boost)
- Available in multiple tooth profiles for optimal performance based on your chain type. Use Drop-Stop ST for use with Shimano 12-speed Hyperglide+ and 12spd KMC chains. Use Drop-Stop A for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains. Drop-Stop B is optimized for SRAM 12 spd Transmission (T-type) and Road Flattop chains but is compatible with all chains that work with Drop-Stop A.
Recommendations
- If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur! Without these precautions, you may experience chaindrops and/or chainsuck."
$128.00
Intense study of chain and chainring wear patterns led to the radical tooth profile that lasts longer, runs quieter and further improves chain retention. Oval ring shape for riders that want to adjust the power profile of their pedal stroke.
- The only oval rings with X-Sync 2 tooth design
- Direct Mount Type: Direct Mount SRAM
- Drivetrain Speeds: 10, 11, 12
- Material: Aluminum
- Ring Position/Type: Chain Retaining Single Ring
- Round or Oval: Oval
- Chainline/Hub Compatibility: 141/148 Boost Hubs
$50.00
Surly's Stainless Steel Chainrings last longer than their aluminum brethern because the 304 grade metal they use is 35% stronger. The rings aren't pinned or ramped so when one side starts to wear you can flip it around and pedal some more! They work great with singlespeed, fixed, and 1x9 applications, and the teeth are 2.1mm thick so they work well with 9-speed chains.
$128.00
Designed for use with SRAM's XX SL Eagle power meter, these Thread Mount replacement rings are purpose made for use with the XX SL proprietary spider design. This chainring mount system allows reduced weight without compromising reliability.
- Proprietary Thread-Mount design specifically for use with XX SL Power Meter spiders
- Light weight and incredibly durable aluminum chainring
- Compatible with SRAM T-Type chains
- SRAM Threaded chainring tool required for installation (Sold separately - TL0190)
$52.99 - $77.00
FSA Super Road Chainrings are designed to provide flawless shifting, with minimal weight and unmatched durability.
- Precision CNC machined AL7075/T6 alloy
$79.95 - $89.95
Wolf Tooth was first to market with Cyclocross 1x specific chainrings because we saw Cyclocross as the perfect use for our Drop-Stop® technology. Since their release, the uses for these rings has expanded beyond Cyclocross to commuting, gravel riding, mountain bikes with 5-arm crank power meters, and even full on-road applications with the giant 50t rings.
Fits 110 BCD 5 arm cranksets
Drop-Stop technology. On Wolf Tooth’s patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris which reduces friction.
Alternating wide/narrow tooth pattern prevents chain derailment
Compatibility:
- These rings are for use with 110 BCD 5-arm cranksets.
- Stock 2x bolts will not work. You will need bolts like our 6mm bolts which are optimized for single ring mounting.
- Chainline - varies - these rings can be mounted in either the big or small ring position on a double cranksets. The most common mounting is in the big ring position because of chainstay clearance. The ring centerline is ~2mm from the ring's mounting face so they usually sit about 2mm closer to the frame than the stock big ring (depends on the stock ring)
Recommendations
- Recommend the use of a clutch-style rear derailleur for the best chain security.
- If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur! - Without these precautions, you may experience chaindrops and/or chainsuck.
Tech Specs:
- Weight: 34t/44g | 36t/58g | 38t/66g | 40t/74g | 42t/81g | 44t/90g | 46t/107g | 48t/115g | 50t/125g
- Material: 7075-T6 aluminum
- Made in the USA
$69.95
Proven cross-compatibility applied to an ultra-lightweight, durable AL-7075-T6 chainring. Highly CNC'd technical finish. Available to match Helix cassette colors, SRAM™ compatible 3-bolt design.
A technology first. Combine with the chain, derailleur/shifter of choice without a change in chain retention quality. Build a dream rig with more freedom and spec creatively. Available in bold colors to match the popular e*thirteen Helix R Cassettes, Plus 35 Stems, and Quick Fill Plasma Valves.
- Save weight, keep your drivetrain options open, and use the chain you want
- 3-Bolt Direct Mount design for use with SRAM™ 3-bolt direct mount compatible cranks
- Cut from billet AL-7075 for the highest strength and wear resistance
- SRAM™ and Shimano™ 11 and 12 Speed Chain Compatible
- Extensive CNC machining for lightweight and looks that kill
- Available in 5 bold Ano colors and 4 sizes 28/30/32/34t
- Match and personalize the way you want?
- E*thirteen QuickConnect Direct Mount rings include 1mm spacers which allows them to be run on legacy cranks (TRS/LG1/XCX) as well as Helix and Helix R cranks
- 3-bolt direct mount chainrings fit SRAM and other similar interface cranks
- Tooth profile
Page 1 of 7
Next page