- Modes include High Steady, Medium Steady, Low Steady, DayTime Pulse, NightTime Pulse, and Economic Flash - Fully USB rechargeable: no batteries to buy or replace - Runtime up 24 hours - Memory function: light turns on at the last mode it was turned off - Power saving function: 10% power or less, lights will automatically switch to lowest lumen output - Built-in battery indicators: RED = less than 25%, GREEN = fully charged - Side illumination ports

Front Compact, durable cycling light with a machined aluminum body. It features built-in cooling fins and cutouts for side visibility. Its single LED design provides up to an impressive 500 lumens of output and eight output modes—including a Daytime Flash mode. Runtime has increased by 2.5 hours for up to 20 hours. Charging is simple with an integrated cable-free USB stick. It securely straps to a variety of handle bar shapes and sizes. - Max 500 lumens / 20 hour runtime in Femto mode - New housing with stylized heat dissipation fins - Silicone rubber strap - IPX7 water resistant - Integrated USB stick for cable-free recharging Rear - Max 30 lumens - USB Rechargeable and magnetic clip-on mount - Wide angle optics with 270° visibility for maximum safety - Aero and round seatpost compatible - Slim design, lightweight and durable - Magnetic clip-in mount - IPX7 water resistant

- Replacement aero mount for Numen light

Recon-E Light to Bosch motor unit connector cable.

This is the "Next Generation" of our compact and versatile fast-mounting bike lights. We powered them up with lithium polymer rechargeable batteries and gave them Steady, Superflash, and Courtesy modes. The flexible mounting system secures the lights to your helmet, bars, seat post, and a ton of other places to help keep you illuminated. - High-output, surface-mounted LED provides steady, Courtesy, and Superflash modes - FL1 tested - headlight run times: 2.5 hrs (steady – 50 lm), 3.5 hrs (Courtesy - 14-45 lm), and up to 14 hrs (Superflash - 50 lm) - FL1 tested - tail light run times: 4.5 hrs (steady – 5 lm), 7 hrs (Courtesy - 1.5-4.5 lm), and up to 22 hrs (Superflash - 5 lm) - Side cut outs provide 270° of visibility - Dust and water resistance rated to IP54 standard - 270 mAh lithium polymer battery charges in 2 hours with micro USB cable (included) - Diminutive size and fast-mounting rubber strap mounts to multiple mounting locations in seconds without tools - 25 grams

The NiteRider Tail Light Strap Mount allows for quick installation and fitment on to standard seat posts. It features a quick release tab that allows you to remove just your tail light, leaving the strap mount installed on the seat post; ideal for when you leave your bike unattended or when it's time for a recharge. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL Not compatible with omega 300 and sentry aero 260 tail lights.

The Button Blinky Safety Set provides a quick way to keep you visible on your next bike ride. Two high output LEDs give you steady and flashing modes with 160° of visibility. These little lights are brilliant, easy to mount and cute as a button! Button Blinky front specs: - 2 high output surface mounted LEDs provide steady and flashing modes - FL1 Tested - Run times: 12 hrs (steady – 15 lm) and up to 40 hrs (flashing - 15 lm) - Provides 160° of visibility - One CR2032 battery (included) - Mounts with rubber stretch strap - 18 grams Button Blinky rear specs: - 2 high output surface mounted LEDs provide steady and flashing modes - FL1 Tested - Run times: 20 hrs (steady – 4 lm) and up to 50 hrs (flashing - 4 lm) - Provide 160° of visibility - One CR2032 battery (included) - Mounts with rubber stretch strap - 18 grams

Featuring 800 lumens of crystal-clear illumination, the Lite Pro 800 Switch (High Volt) e-bike cycling light maximizes usable output with its enhanced Maximum Optical Reflection (MOR) lens while a compact CNC-machined aluminum body is equipped with cooling fins to maximize heat dissipation. Compatible with higher-voltage e-bike inputs (12-48v), the Lite Pro draws 8 watts during operation and easily plugs into batteries from top makers including Bosch, Shimano, and Yamaha. An integrated remote switch simplifies operation while the inclusion of both an e-bike stem mount and aluminum CNC fork mount maximize the light's versatility. A 130cm power cable is included. - Max Lumens: 800 - Weight: 173g

Portland Design Works' Spaceship 3 Headlight/Radbot 500 Taillight Set offers bright LED lights, front and rear, for super nighttime visibility. The Spaceship 3 headlight focuses three brilliant LEDs through a precision lens, illuminating your course ahead. Powered by 2xAA batteries, the Spaceship 3 includes both steady and flashing modes for up to 100 hours of run time. Includes the Mission Control 2.0 mount. The RADBOT 500 is equipped with a blazing 0.5 watt LED and a large precision reflector to provide visibility to your backside. Powered by 2xAAA batteries, the RADBOT has three modes: zZz pop, Cornea Blitz and Rock Steady for up to 30 hours run time. It also features an on/off switch that must be depressed for 1.5 seconds to turn the light on and off. This helps prevent the RADBOT from being accidentally turned on when you're transporting it in your pocket or bag off the bike. Spaceship 3: - Three bright white LEDs - Runs on 2xAA batteries (included) for up to 100 hours of run time - 2 Modes: Steady and Flashing   - Weatherproof exterior for all season riding - Includes Mission Control 2.0 mount  - Weight: 91 g (3.2 oz) - Lifetime PDWarranty Radbot 500: - 0.5 watt red LED made by Nichia - 3 Modes: zZz pop, Cornea Blitz and Rock Steady for up to 30 hours run time - Large precision reflector - Includes both Stayputnik quick release and Rack mounts - Weatherproof exterior for all season riding - Runs on 2xAAA batteries (included) - Weight: 62 g (2.2 oz) - Lifetime PDWarranty

- Modes include High Steady, Low Steady, DayTime Pulse, NightTime Pulse, and Economic Flash - Fully USB rechargeable: no batteries to buy or replace - Runtime up to 26 hours - Memory function: light turns on at the last mode it was turned off - Power saving function: 10% power or less, lights will automatically switch to lowest lumen output - Side Illumination ports allow cyclists to be seen when riding across traffic lanes

The Zecto Drive 200+ Rear is a low-profile, high-visibility light with an impressive 200 lumens of brightness. Its six combined solid and flash output modes offer versatile options for any situation. Its highly disruptive Daytime Flash mode ensures maximum visibility during daylight hours, and the intelligent Power Indicator displays battery runtime and increases side visibility. The light is fitted with a patented 2-in-1 clip and strap mounting system, allowing easy attachment to handlebars or loops. It is rigorously tested to IPX7 Waterproofing standards to withstand even the harshest weather conditions. With a 650 mAh battery capacity, the Zecto Drive 200+ Rear offers a maximum runtime of up to 35 hours in Femto mode. It also boasts USB-C waterproof charging(cable not included), making it easy to keep it charged and ready to go. - Max 200 lumens / 35-hour runtime in Femto mode - Daytime Flash mode with Highly Disruptive Pattern - Waterproof USB-C charging port with charge indicator - 2-in-1 clip and strap mounting system (Patented) - Multiple mounting options like dog collars or strollers - Six combined solid and flash output modes - Rigorously tested to IPX7 Waterproofing standards - 650 mAh battery capacity

The E-Bike Orbis StVZO E600 is an advanced StVZO certified e-bike cycling front light delivering 600 lumens of output. This light is housed in a die-cast and CNC-Machined Aluminum body with extruded cooling fins ensuring durability, efficient heat dissipation, and an advanced computerized thermal management chip to maximize lumen output efficiency. The Orbis StVZO E600 offers Daytime Running Light mode as well as an intelligent 'Thermal Protection Safety Feature' which automatically reduces light output for safety and efficiency. Rigorously tested to IPX7 Waterproofing standards, it is built to withstand various weather conditions. It has an integrated 130 cm (51.2 inches) cable connecting to the e-bike's motor/battery system. The BES3 BOSCH connector and CNC Machined Aluminum E-bike Mega Mount are included. E-Bike compatibility: 10.5 – 13.5V input, 8.5W Low Beam / 13W Daytime Running Lights. Our e-bike lights are powered by the motor/battery of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make and model, battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you. - 600 lumens - StVZO-Optimized lens - Daytime running lights (ECE R87) - Die cast and CNC-machined aluminum body with optimized heat-dissipating design - Includes CNC Machined Aluminum E-bike Mega Mount - Thermal Protection Safety Feature: Auto-reduces light output for safety and efficiency - Rigorously tested to IPX7 Waterproofing standards - E-bike compatible 10.5 – 13.5V input, 8.5W LB / 13W DRL - Versatile E-bike system compatibility - 130cm power cable with BES3 BOSCH connector included

FRONT LIGHT: The Fusion Drive Pro 600+ Front is a budget-friendly, feature-packed cycling light designed to elevate your riding experience. It provides powerful and long-lasting illumination with a maximum output of 600 lumens and a runtime of up to 36 hours. This light offers six output modes, including highly disruptive Daytime Flash ensuring maximum visibility during daylight hours, and the intelligent Power Indicator displays battery runtime. The CNC-machined aluminum construction with cooling fins guarantees durability and efficient heat dissipation, the fresh optical design enhances light dispersion, and the optional GoPro mount allows for versatile mounting options. With waterproof USB-C charging(cable not included), compatibility with the Infinite Light Power Pack+, and rigorous IPX7 waterproofing testing, this light is ready to accompany you on any adventure. REAR LIGHT: Experience the next level of cycling safety with the Strip Drive 300+ Rear light. This exceptional rear light offers ten LEDs and a maximum output of 300 lumens; it is engineered for impressive efficiency and runtime, providing the best beam pattern for optimal light dispersion in even the most challenging conditions. Plus, with an impressive 80-hour max runtime, you can rest assured that this light will last as long as you need it to. Rigorously tested to IPX7 Waterproofing standards, it is built to withstand various weather conditions. With seven output modes, including highly disruptive Daytime Flash modes, wide-angle optics providing 270° visibility, USB-C waterproof charging(cable not included), and a lightweight yet durable co-molded design, it's the ultimate choice for every cyclist. A versatile mounting system attaches to aero or round seatposts and recharges via a waterproof USB-C connection. Note: These lights are not being distributed within the German market. - Front Light Max 600 lumens / 36-hour max runtime - Front Light Max 600 lumens / 36-hour max runtime - Waterproof USB-C charging port with charge indicator - Daytime Flash mode with Highly Disruptive Pattern - CNC-machined aluminum construction with cooling fins - Engineered Optical Design - GoPro mount available separately - Infinite Light Power Pack+ Compatible for extended run times - Rigorously tested to IPX7 Waterproofing standards - 1900 mAh battery capacity - Rear Light Max 300 lumens / 80-hour runtime in Femto mode - Daytime Flash mode with Highly Disruptive Pattern - Wide Angle Optics: 270° of visibility - Waterproof USB-C charging port with charge indicator - Lightweight and durable co-molded design - Maximum side visibility design - Multiple mounting options with ladder strap - Seven combined solid and flash modes - Fits most seatpost shapes - Rigorously tested to IPX7 Waterproofing standards

Epro 1000 is NiteRider's first headlight specifically made for electric bikes. It comes with pre-wired power line for connection to the eBike's battery. Power line cable measures approximately 52" in length. Headlamp powers on with ignition switch. Features two modes-Steady ON and Pulse Flash-with Built-in Mode Memory (remembers last setting). FEATURES - Lumen Output: 1000 - 2 Modes - Hardwired, Voltage 12 to 40 Volts 1.2 amps at 12v, 300mA at 40 volts - Water / Dust Resistant IP64 Rated - Weight: 166 grams - Fits 22mm-31.8mm seat posts - Includes a pre-wired Epro 1000 Head Light, Handlebar Clamp Mount, and Rubber Mounting Shims LIGHT MODES 1) Steady ON 2) Pulse Flash NiteRider recommends this headlight be installed by an authorized e-bike service and repair shop. Please reference your bike manufacturers manual for compatibility. Not compatible with 6 Volt systems.

If you're looking to mount your NiteRider PRO series lights to a GO Action Camera style mounting point, this is the accessory you've been looking for. The mounting point screws into the GO Action Camera style connection for a solid and secure fitment. SYSTEM COMPATIBILITY - PRO Series Not compatible with Lumina Pro lighting systems

Lezyne Power STVZO Pro Headlight. German StVZO optimized lens with approved flood and long-range beam. High performance always-on LED delivers 310 lumens (115 Lux). Durable, heat-dissipating CNC machined aluminum construction. Auto day/night system extends battery runtime. E-bike compatible 6 – 12v input, 6w easily plugs into batteries from top makers including Bosch, Shimano and Yamaha. Includes X-Lock stem mount and CNC-machined aluminum fork mount. 130cm power cable included.

Handlebar mount for all systems that use the slider mounting clip. Fits handlebar clamp diameters from 25.4mm–35mm. System Compatibility: - Pro Series - HID Series - Classic Plus & Select - Evolution & Digital Evolution - HeadTrip & Digital HeadTrip - TrailRat & TrailRat Select - RoadRat - Digital Patrol LED - Digital Patrol - Pre 2001 systems

The TL 6.0 will help keep you safe and seen from behind (210-degree visibility). The TL 6.0 operates on 2 AAA batteries (included) for up to 60 hours on flash. Features - Lumen Output: 25 - 4 Modes with a Run Time up to 60h - 2 x AAA Alkaline Battery Powered - Weight: 70g - Battery: 2 x AAA Alkaline - Increased safety with 210° of Visibility - Budget Friendly Rear Lighting System - 25 Lumen taillight with Eye Catching Flash Patterns - Water / Dust Resistant IP64 Rated Run Time - Up to 60h

Problem Solvers' Braze-on Light mount threads into your fork or fender eyelets, allowing you to mount lights or accessories. It's lower position is great for getting your light closer to the ground for better visibility.

- Compact, sleek design - Robust safety features including daytime and nighttime pulse modes - Side illumination ports allow cyclists to be seen when riding across traffic lanes - 6 modes including Daytime Pulse and Nightime Pulse - Fully USB rechargeable: no batteries to buy or replace - Memory function allows light to turn on at the last mode that was used - Power saving function automatically switches the light to the lowest lumen output when the battery gets to 10% power or less - Built-in battery indicator: red = lower than 25%, yellow = 50%-25%, green = fully charged - No tools bracket - Sold with Avenue R-45 rear taillight - Rear light includes 5 modes - Side illumination ports

- Modes include High Steady, Low Steady, DayTime Pulse, NightTime Pulse, and Economic Flash - Fully USB rechargeable: no batteries to buy or replace - Runtime up to 15 hours - Memory function: light turns on at the last mode it was turned off - Power saving function: 10% power or less, lights will automatically switch to lowest lumen output - Built-in battery indicators: RED = less than 25%, GREEN = fully charged

X3 Front Light: - Double-lens technology provides HIGH-QUALITY precise light distribution - LED STRIP shows battery level - Side lighting for INCREASED VISIBILITY AND SAFETY - MEMORY FUNCTION remembers the last mode used - Fully USB-RECHARGEABLE - NEW snap-tight bracket - 30 LUX - 5 Modes - Run time on Eco = 24 hrs - Run time on High Steady = 4 hrs XR Rear Light: - Light guide for INCREASED VISIBILITY AND SAFETY - MEMORY FUNCTION remembers the last mode used - Fully USB-RECHARGEABLE - Compact size - Bracket with flexible mounting option - .06 LUX - 5 Modes - Run time on Eco = 36 hrs - Run time on High Steady = 20 hrs

- ACCELERATION SENSOR - when speed is reduced by more than 1.6 m/s (5.76 km/hr or 3.58 mph) an additional LED is switched on - Light guide for INCREASED VISIBILTY AND SAFETY - Brake light is 3 TIMES BRIGHTER than normal output in Steady mode - ADDITIONAL OPTIC in front of LED at lower end of light guide - MEMORY FUNCTION remembers the last mode used - Fully USB-RECHARGEABLE - Bracket with flexible mounting option - .20 LUX - 7 Modes - Run time on Eco = 36 hrs - Run time on High Steady = 10 hrs

- Modes include High Flash, Medium Steady, Low Steady, DayTime Pulse, NightTime Pulse, Economic Flash - Fully USB rechargeable: no batteries to buy or replace - Runtime up to 11 hours 15 mins - Memory function: light turns on at the last mode it was turned off - Power saving function: 10% power or less, lights will automatically switch to lowest lumen output - Built-in battery indicators: RED = less than 25%, GREEN = fully charged - Side illumination ports

Engineered to be seen day and night, the incredibly slim Hotrod™ Front and Rear combo light set radiates a powerful 110 lumens forward (white) and 50 lumens backwards (red). The pair’s continuous array of LEDs penetrate broad daylight with powerful flashes and radiates an extra-wide glow to be seen at night. Every bit the road cyclist’s light set, its low profile flexible mounts are designed for most standard and aero styles. Features for both Hotrod Front™ 110 & Hotrod Rear™ 50: - 110 lumen front light (white), 50 lumen tail light (red) - 6 modes per light - Built-in 24/7 Safety Technology® gives you a powerful selection of night and day modes (High - Low - SteadyPulse® - Low Flash - DayLightning® - Zoom) - SteadyPulse® mode features a steady beam to help motorists gauge their distance while overlapping pulses keeps them alert - DayLightning® mode emits lightning-like flashes to highlight your presence in the brightest of daytime hours - Zoom mode signals those around you with gentle changes in brightness - Continuous array of LEDs work in unison to illuminate an extra-wide and powerful glow - USB rechargeable Li-ion battery - Low battery indicator - Light mode memory saves the mode you're in before the light is turned off - Ultra low profile, water-resistant design only weighs 29 grams - Versatite™ flexible mount conveniently attaches to most standard and aero styles *Features and specs are subject to change without notice.

The Dice Duo is the smallest USB rechargeable light capable of changing from a white headlight to a red tail light at the press of a button. Designed for the road, this cubic inch light can turn from an impressive 110 lumen headlight to see, to an attention-grabbing 30 lumen tail light to be seen. Its adaptable flex mount can easily strap to handlebars or seat posts in a snap, even aero styles. For premium safety, its Adaptive Flash technology senses day or night, automatically switching to the optimal flash mode to maximize your visibility. Made for road cyclists and commuters, the Dice Duo is a powerful headlight and a tail light rolled into one. Performance - Functions as 110 lumen bicycle headlight or 30 lumen tail light Technology & Safety - 2 in 1 technology allows you to switch from headlight to tail light just by holding the power button for 3 seconds. - 8 headlight and 8 tail light lighting modes engineered for use on roads and commuting - Headlight mode: Boost, High, Medium, Low, SteadyPulse® Low, SteadyPulse® High, DayLightning® Triple Flash, DayLightning® Single Flash - Taillight mode: High, Group, Single Flash-Day, Triple Flash-Day, SteadyPulse® -Day, Single Flash-Night, Triple Flash-Night, SteadyPulse® -Night - SteadyPulse® mode alerts motorists with attention-grabbing pulses while its overlapping steady beam constantly lights your way at night - DayLightning® mode emits lightning-like flashes to highlight your presence in the brightest of daytime hours - Cycling Tuned Optics expands your field of vision with an extra-wide and long-range beam compared to typical lighting optics - IP64 water-resistant design for use in all weather conditions - USB rechargeable internal battery lasts up to 90 hours - Light mode memory saves the mode you're in before the light is turned off - Low battery indicator alerts you when a charge is needed RUN TIMES: Headlight mode: 1 hrs to 40 hours Taillight mode: 1:45 hrs to 90 hours CHARGE TIME: - 2 hrs MOUNTING: - Flexible mount easily adjusts to fit on handlebars and seat posts including aero styles BATTERY: - Built-in Li-Ion SYSTEM WEIGHT: - 30g *Features and specs are subject to change without notice.

Producing 900 brilliant lumens, the NiteRider® Lumina™ Micro 900 is smaller, lighter, and more compact than the original Lumina™ series. Vmax+™ 150 is NiteRider’s first taillight featuring COB (Chip-on-Board) LEDs, which for cyclists means it emits highly visible flash patterns in a smaller, more compact package. Its feather-like light weight makes it perfect as a wearable safety light—easily clipping onto straps, belt loops, and more. For added convenience, the Vmax+ 150 features mode memory, will power ON in the last mode used. LUMINA™ MICRO 900 FEATURES - Lumen Output: 900 - 5 Modes with Run Times: 2:00 – 60:00h - Charge Time: 2:30h at greater than 500mA | 4:30h at 500mA - Weight: 130g - Low Battery Indicator and Micro USB Rechargeable - Water / Dust Resistant IP64 Rated LUMINA™ MICRO 900 RUN TIMES Low - 11:00h at 200 Lumens Med - 4:30h at 450 Lumens High - 2:00h at 900 Lumens Flash - 11:00h at 900 Lumens Walk - 60:00h at 30 Lumens Vmax+™ 150 TAILLIGHT FEATURES - Lumen Output: 150 - 6 Modes with Run Times: 5:30-27:30h - Charge Time: 2:00h - Water / Dust Resistant IP64 Rated - USB-C Rechargeable - Mode Memory (Powers ON in the last mode used) Vmax+™ 150 RUN TIMES Fast Flash - 11:30h Slow Flash - 9:30h Disco Flash - 9:45h Pulse Flash - 6:00h High Steady - 4:30h Low Steady - 25:30h Note: The NiteRider® Lumina™ Micro 900 is shipped from the factory in Travel Lock Out Mode. This mode feature is designed to save battery power by preventing the headlight from accidentally turning on while in storage. Simply press and hold the power button for 8-10 seconds to lock/unlock.

The Swift 300 gives you more than enough lumens at our lightest weight for headlights (82 grams). NiteRider makes this headlight USB rechargeable for convenient on-the-go charging. The Swift 300 features a highly durable light housing with Dupont Fiberglass reinforced nylon meeting all required FL1 Standards for impact testing and water / dust resistance. Vmax+ 150 is NiteRider's first taillight featuring COB (Chip-on-Board) LEDs, which for cyclists means it emits highly visible flash patterns in a smaller, more compact package. Its feather-like light weight makes it perfect as a wearable safety light-easily clipping onto straps, belt loops, and more. SWIFT 300 FRONT LIGHT FEATURES - Lumen Output: 300 - 5 Modes with Run Times: 2:00 – 28:00h - Charge Time: 2:00h at greater than 500mA | 3:15h at 500mA - Water / Dust Resistant IP64 Rated - USB Rechargeable SWIFT 300 TYPICAL RUN TIMES Low—15:00h at 80 Lumens Med—9:00h at 150 Lumens High—2:00h at 300 Lumens Flash—12:00h at 300 Lumens Walk—28:00h at 20 Lumens Vmax+ 150 TAILLIGHT FEATURES - Lumen Output: 150 - 6 Modes with Run Times: 5:30-27:30h - Charge Time: 2:00h - Water / Dust Resistant IP64 Rated - USB-C Rechargeable Vmax+ 150 TYPICAL RUN TIMES Fast Flash—12:45h Slow Flash—10:15h Disco Flash—10:45h Pulse Flash—7:00h High Steady—5:00h Low Steady—27:00h

Lumina Micro series delivers high output in a small package, making it great for helmet usage. Features a modular designed lightweight body combined with increased thermal properties ensuring a brighter, longer lasting LED and a newly designed handlebar strap mount with quick-release tab - 4 light levels plus a flash mode - Lumina Micro 900 and 650 include a VMAX+ - Lumens: 650/80 - Run time: up to 50 hrs F/up to 27 hrs R - Weight: 130g/28g

- Compact, sleek design - Robust safety features including daytime and nighttime pulse modes - Side illumination ports allow cyclists to be seen when riding across traffic lanes - 6 modes including Daytime Pulse and Nightime Pulse - Fully USB rechargeable: no batteries to buy or replace - Memory function allows light to turn on at the last mode that was used - Power saving function automatically switches the light to the lowest lumen output when the battery gets to 10% power or less - Built-in battery indicator: red = lower than 25%, yellow = 50%-25%, green = fully charged - No tools bracket