The Salsa Guide Seatpost is designed to blend into the background; just like a good seatpost should. Strong, reliable, and always just where you left it. - 6061 Aluminum shaft - Two-bolt head

The Salsa Guide Deluxe Seatpost is premium aluminum: lightweight, strong, and drama-free. Count on it to be there when you need it. - 2014 Aluminum shaft - Two-bolt head

Whether it's a cross remount, an unexpected pothole, or a rough line down the trail, the WCS Zero post will not relinquish its position. Featuring a confidence-inspiring extra-secure fore/aft bolt system, the Zero post is second-to-none in ease of installation and fit adjustment. - Fore/aft adjustment bolts for precision adjustment and secure clamping - 3D Forged 2014 Alloy - Offset: Zero - Cradle: Standard saddle rail clamp

The newly redesigned EC70 Seatpost takes our superlight unidirectional carbon and applies our patent pending ISA technology - Independent Saddle Adjustment - which allows for completely independent fore-aft adjustment and saddle adjustment. With the 2 pitch adjustment bolts, the saddle angle gets locked into place as if you were adjusting limit screws, and unlike single bolt designs, you get adjustability and security. Available in 20mm Setback and Zero configurations. - Finish: Matte Black UD Carbon/Matte Black Head - Weight: Zero offset, 210g; Setback offset, 223g - Head offset: 0mm; 20mm - Length: 350mm w/ 80mm min. insert - Quill size: 27.2mm - Rail clamps: 7mm round; 7mm x 9mm oval (both included) - Material: EC70 carbon

Kalloy's 602 seatpost comes in a wide variety of diameters to fit most frames. Simple, sturdy, and lightweight, the 602 makes a great replacement seatpost.

- 3D forged from 2014 heat-treated aluminum for optimal strength to weight ratio - Race Face's triple butting design maintains strength in critical areas while reducing overall weight - The tube is anodized & shot peened for increased fatigue life - Updated Hunter head design for easy saddle installation and full adjustability - 3D forged from 2014 heat treated aluminum with triple butted mast - Thumbscrew tightening system allows quick dial-in of the saddle angle by hand - Angled clamp bolts allow easy tool access for hassle free adjustment - Rubber grommet seals the post to prevent water from entering seat tube - Accepts 7/8mm CrMo/alloy and 7/9mm carbon rails. 260g (30.9mm)

- Built on the revered FOX Transfer platform, the Turbine R Dropper Post has infinite height adjustment with up to 175mm of drop Specs: - Seat Post Diameter: 30.9mm - Travel: 200mm - Cable Routing: Internal

Performance suspension seatposts designed to add comfort and compliance to any bike without adding unnecessary weight. With 35mm of travel, the eeSilk+ is a suspension seatpost designed to noticeably soften any gravel or mixed-surface road. These posts make great enhancements to gravel or mixed surface bikes by reducing the chatter transmitted from the surface to the rider and can be tuned to rider weight through a simple elastomer change. #5 elastomer comes pre-installed, other weight elastomers sold separately - Travel: 35mm - Length: 387mm - Weight: 373g (27.2mm); 378g (31.6mm) - Max Rider Weight: 250lbs - Offset: 12mm - Minimum Extension: 80mm - Maximum Extension: 287mm

Ride longer, ride farther with the eeSilk premium suspension seatpost. The eeSilk is comparable in weight to traditional rigid performance seatposts while offering 20mm of vertical compliance improving control on rough surfaces and reducing fatigue on long rides. These posts make great enhancements to endurance road bikes by reducing the chatter transmitted from the surface to the rider and can be tuned to rider weight through a simple elastomer change. #5 elastomer comes pre-installed, other weight elastomers sold separately. - Travel: 20mm - Length: 375mm - Weight: 345g (eeSilk 27.2) - Max Rider Weight: 250 lbs. - Offset: 8mm

Saddle Up Based on the latest FOX Transfer platform with its proven performance, the new Turbine R Dropper Post features a slick seat clamp design for reduced stack height and a 25g weight savings from the previous version. This post will treat you right. Less is More New, patent-pending FOX seat clamp design dramatically reduces stack height, allowing you to fit more travel into a shorter space. Full Coverage Proven FOX-designed internals provide infinite height adjustment, but perhaps more importantly—even easier serviceability. No-Sweat Installation Mounting a saddle and getting your saddle position dialed is easy thanks to the user-friendly seatpost clamp. Brilliantly Uncomplicated Uses standard shifter cable and housing. You know, just to keep things real. Oh yeah—it's also 25g lighter than the previous version. - Compatible with Matchmaker - Includes post only - Mechanical lever actuation - Head Type: Zero Offset—2 Bolt - Weight: 520g

The Reverb Stealth features Vent Valve Technology for super simple service if the need arises. Redesigned internals provide effortless actuation and increased reliability. With reduced overall post lengths and new travel options, riders of all shapes and sizes benefit from more travel than ever before. The new Reverb Stealth redefines what it means to simply go up and down. - Shorter overall post length - Stealth Internal cable routing

Built without compromise, the Highline 11 combines premium materials with our tried-and-trusted hydraulic IFP cartridge system, resulting in our lightest dropper post yet. Featuring a carbon quill, carbon head, and titanium hardware, the Highline 11 sheds up to 100 grams over our Highline 7, all without compromising on any features or construction. The post maintains all of your favorite elements such as infinite adjustment and a reliable hydraulic IFP. Built with every rider in mind, from cross country racer to weekend enduro rider the Highline 11 is available in travel lengths ranging from 60mm to 170mm allowing the rider to choose the perfect post for them.

- Up to 200mm of vertical travel adjustability with limitless positioning - Tool-free adjustable travel design which let you adjust the travel by 5mm increment depending of rider's preference - Internal cable routing only - Clamp design compatible with standard 7mm (alloy) or 9mm (carbon) saddle rails - Includes 1x remote lever Travel option: - 95-120mm - 120-150mm - 140-170mm - 170-200mm

The redesigned Zero post offers no-slip saddle engagement and high adjustability by securing the rails with fore and aft bolts. Whether you're hitting rough singletrack or remounting in a hurry, this ensures the saddle stays exactly where you want it. - Material: 2014 alloy - Total length: 400mm (including 100mm of minimum insert) - Saddle clamp: 2-bolt fore/aft - Saddle clamp torque: 7Nm (max) - Seat collar torque: not specified - follow frame/seat binder specification - Weight: 240g (27.2x400mm)

Proven 2-bolt design provides a class-leading balance between strength, weight, and easy adjustability. Low-profile clamp reduces stress on lightweight rails and won't bottom out. - Material: 6061 alloy - Saddle clamp: standard - Saddle clamp torque: 13Nm (max) - Seat collar torque: not specified - follow frame/seat binder specification

The EA70 AX dropper post joins our AX series of horizon-expanding drop bar gravel and adventure componentry. Features include a reliable cartridge design, internal routing and availability in two lengths - 350mm and 400mm. Our EA70 AX post brings 50mm of drop, allowing for fitment on everything from your wide-tired CX bike to modern gravel bikes. - Can be paired with drop bar optimized levers or drop bar compatible shifters - Cable attaches from either direction for compatibility with all dropper levers - Two lengths for better fitment on dropped top-tube gravel bike frame designs - Finish: Black Ano - Weight: 350mm - 400g - Head Offset:0mm - Drop: 50mm - Quill Sizes: 27.2mm Diameter - Material: EA70 Alloy

- RaceFace Ride XC Seatposts made of forged AL-6061 - Forged, anodized and shot peened AL-6061 mast - 2-bolt head holds saddle securely while retaining easy adjustability - Weight: 295 g

ENVE's proven twin-bolt seatpost design refined for the modern road bike with seatpost battery integration capabilities. - Material: Carbon Fiber - Hardware Material: Titanium - Saddle Angle Adjustment: 0 – 27 degrees - Saddle Rail Compatibility: 7x10mm Carbon Rails / 7mm Round Alloy Rails - Torque Spec, Saddle Rail Clamp Bolts: 5.5Nm - Torque Spec, Seatpost Collar: Determined by your Frame manufacturer/Seatpost Collar - Weight: 210g (25.4mm), 204g (27.2mm), 204g (30.9mm), 204g (31.6mm)

Thomson's Elite Seatpost is perhaps one of the most recognizable bicycle components in the world and it has earned its reputation as a super-strong, light and reliable beauty. With roots in the aerospace industry, Thomson builds the post with a tough and light 7000-series aluminum body, an elliptical extrusion that adds strength and stiffness, and a head and seat clamp forged and machined from a block of aluminum to eliminate any possible weak areas. Plus, its simple-to-use 2-bolt seat clamp allows speedy, infinite and secure seat angle adjustment from minus 5 degrees to plus 29 degrees. Upgrade your favorite ride to a Thomson seatpost and start riding in style.

- Designed using SRAM Exogram technology - Available the Zipp SL Speed DI2 Internal Battery Mount to hold a Shimano DI2 seatpost battery within the SL Speed seatpost. (Sold separately) - Matte Black finish - Seat Post Diameter: 31.6mm - Seat Post Length: 400mm

- Length: 400mm - Offset: 0mm - Clamp Style: Standard Rails - Material: Aluminum

The proven 2-bolt design on this classic provides a class-leading balance between strength, weight, and adjustability. The two-bolt design is easy to adjust and holds tight. Its low profile clamp reduces stress on lightweight rails and won't bottom out, and the bolts are oriented to the axis of the rails for the greatest contact area with the saddle. The Classic also features Ritchey's 'Classic' high-polish silver finish. - Material: 2014 alloy - Total length: 350mm (including 100mm of minimum insert) - Saddle clamp: standard - Saddle clamp torque: 13Nm (max) - Seat collar torque: not specified - follow frame/seat binder specification - Weight: 260g (27.2x350mm) - Color: high-polish silver

The smooth and sleek design of the patented SideBinder clamp makes the Ritchey WCS Carbon 1-Bolt a sophisticated choice to finish off a performance-oriented build. The beauty of this carbon masterpiece lies in the simplicity of the design of the wide clamp head. Secured with a single 5mm bolt, this post offers ease of adjustability while relieving stress on saddle rails. - Monocoque carbon construction - Available in 27.2 & 31.6mm diameters - Available in 350 and 400mm lengths - 7x7mm saddle rail clamp included - Interchangeable clamps available for all different carbon rail sizes - Saddle clamp torque spec: 12Nm - Matte UD carbon finish - 185g (27.2/350)

The Salsa Guide Carbon Seatpost is lightweight, durable, and supportive when you need it most. - Carbon shaft - Bonded Aluminum two-bolt head

ENVE's proven twin-bolt seatpost design refined for the modern road bike with seatpost battery integration capabilities. - Material: Carbon Fiber - Hardware Material: Titanium - Saddle Angle Adjustment: 0 – 27 degrees - Saddle Rail Compatibility: 7x10mm Carbon Rails / 7mm Round Alloy Rails - Torque Spec, Saddle Rail Clamp Bolts: 5.5Nm - Torque Spec, Seatpost Collar: Determined by your Frame manufacture/Seatpost Collar - Weight: 178g (25.4mm, 25mm offset), 168g (27.2mm, 0mm offset), 178g (27.2mm, 25mm offset)

The Turbine R dropper brings you the function and reliability you deserve with Race Face aesthetics to complete your build. - Built by Fox using the same chassis and internals as the Fox Transfer post - Features faster rebound than Fox Transfer - Cable actuated with tool-free quick disconnect for easier installation and removal - Low lever force provides consistent actuation pressure even with saddle weighted or unweighted - Easy to modulate return speed with lever - Race Face 1x Lever or Universal Lever compatible - Matchmaker compatible - Remote sold separately

- Highly tested & engineered unidirectional carbon tube offers outstanding fatigue & impact strength for a lightweight XC post - Simple, lightweight 2 bolt design permits the saddle to be installed without disassembling the head - Angled clamp bolts allow easy tool access for hassle free adjustment and tightening - The rubber seatpost grommet fully seals the post to prevent water entering your seat tube - Hunter head is suitable for most rail types 7/8mm alloy rails and 7/9mm carbon - Wide lower cradle gives extra rail support for lightweight saddle rails - Narrow upper cradle increases the amount of forward/back saddle adjustment - Tilt Adjustment 6° up 12° down with Zero offset

We designed the Tall & Handsome with strength and elegance in mind, but also to be super easy to setup and adjust. Like all PAUL components, it’s built to the highest standards for tolerance, function, reliability, and ease of use. Machined by us here in sunny Chico, California. - Nice looking seatpost is built to the highest standards for function and ease of use - Head and shaft are made from a special high strength 2024 aluminum alloy - Two bolt head offers roughly 15 degrees of tilt adjustment - 26mm clamp setback. 320g - Made in the USA

It’s a traditional straight up pivotal design with a 200mm length.

Specialized's Command Post IRCC, offers Cruiser Control technology. With ten micro-adjust positions, you'll always be able to find just the right saddle height for descending like Gwin or climbing like Sauser. - Patented mechanical locking system with the addition of Cruiser Control Technology. - Cruiser Control technology features added positions in the cruiser control range. - Bonded lightweight aluminum micro-adjustable “alien” style head. - Dual-keyway system eliminates saddle wiggle. - Energized triple-lip wiper prevents contamination. - Durable zero-gap, dual-lip x-ring internal seal ensures long-term durability. - Ships with SRL and grip mounted lever.