Flat or clipless pedals? The question may arise, but not anymore thanks to the GEO TREKKING commuter range of pedals. This robust aluminum pedal is flat on one side and SPD-compatible on the other, with the added security of the VISION light system for when the ride turns dark. - Technology: Hybrid pedals = half flat + half clipless - Cleats: X-Track Easy - Cleats Standard: SPD compatible - Release angle: 13° - Retention: 5-10 - Body: Aluminum - Traction: 8 traction pins - Spindle: Chromoly+ - Platform width: 83mm - Weight (pedal): 247g - Weight (pair + cleats): 550g - Light included: Yes (x2) - Light modes: 3 (steady/flash/flash eco) - Battery Life: Up to 30h (flash eco) - Light Output: 15 lumens - Battery: Micro USB rechargeable (cable included) - Charging time: 50 min - Beam angle: 180°

PA12A pedals feature a reinforced nylon composite body with replaceable grip pins and CNC machined chromoly spindle. - 2 x sealed bearings and DU bushings - Replaceable grip pins - Dimensions: 100 x 95 x 18 mm

The Tom Dugan signature Grandstand pedals feature a slim design to keep feet close to the axle, dual concave and a wider platform. - 17mm thick at center - 105mm wide - Full Size 14mm heat-treated axle with 17mm wrench flats and 6mm broach

KEO BLADE CARBON pedals feature a Chromoly+ axle and stainless steel bearings for extreme reliability. Beyond its weight, the surface contact area-to-weight ratio is the best in class. Light, aerodynamic and powerful, these pedals have all you need to take it to the next level. - Lightweight, but durable at 115g per pedal / 300g pair with cleats - The 67mm platform width and 700mm² platform area allow for maximum power transfer - The use of a carbon blade instead of a conventional metal spring means this pedal is lighter, more aerodynamic, and offers a faster cleat release - Easy clip in/out with composite blade tension from 8 (installed) to 12 (sold separately) - KEO cleats included - Carbon Body, Chromoly + Spindle, Patented Composite Leaf Spring Retention, Steel Bearings

What if you could take control of gravity? Lean into the bend as far as possible without losing contact with the trail, or fly over doubles with ease? Designed alongside our top athletes to push the limits of grip and control, our TRAIL ROC PLUS flat pedals feature a wide, concave forged aluminum platform and high-resistance axles for perfect stability and unparalleled toughness. With 10 adjustable aluminum pins and a 16mm profile height, they keep you glued to your bike through curves, jumps and technical sections. Make every run a new challenge!

- Super thin-profile platform pedal designed for freeride, BMX, and urban riders - Impact grade Nylon construction with in-molded surface pegs (10 per side) for superior traction and longevity compared to cheaper polycarbonate alternatives - 15mm height/100mm width - CrMo spindle axle with a serviceable loose-ball bearing system for easy maintenance - Design compatible with most foot-retention strap systems including Gates Straps (available separately) - Weight: 345g

Crank Brothers' Candy 11 is the pedal to sate a racer's sweet tooth. This customizable pedal boasts integrated traction pad technology to refine fit, feel and power transfer, while titanium components shave weight. A ribbed body helps your foot grab the pedal body when you've unclipped, though the four-sided entry will have you engaged and off on the first try. Rely on chamfered edges to reduce rock-strikes, and a hex alloy end cap bash guard to help minimize damage to the pedal body.

Discover the world of clipless pedals with the KEO CLASSIC 3. The easily adjustable tension makes clipping in and out smooth and simple, with the ability to increase tension to fully appreciate the pedal and all its advantages. - Technology: Spring - Cleats: Keo Grip - Retention: 8 to 12 - Body: Composite - Spindle: Chromoly - Platform Material: Composite - Platform area: 400mm² - Platform width: 50mm - Q Factor: 53mm - Stack height + cleats: 17.8mm (11.5 + 6.3mm) - Weight (pedal): 140g - Weight (pair + cleats): 350g

Dimension Mountain Basic Pedals. - Molded nylon 1-piece, caged-type pedal with reflectors - Accepts toe clips - Hang tag packaging - Pedal Body Material: Plastic - Pedal Spindle: 9/16-inch or 1/2-inch - Pedal Type: Toe Clip Compatible - Spindle Material: Chromoly Steel - Weight: 330g

- Slim and lightweight nylon composite body built tough for DH and enduro riding - Concave shape and 9 molded pins for maximum grip - Durable chromoly steel spindle - Sealed cartridge bearing for smooth long-lasting performance - Weight: 350g

Competition-oriented and customizable for refined fit, feel, and power transfer. Details - Durable alloy body - Durable cast steel wings - Integrated traction pad technology to optimize the shoe/pedal interface - Ribbed body for better traction when unclipped - Chamfered edges to reduce rock-strikes - Hex alloy endcap and bashguard - 4-sided entry / superior mud shedding - Customizable float & release angle - Premium bearings & double seal system Specs - Body Material: 6061-T6 aluminum - Cleats: Premium brass cleats with shims included - Endcap: Hex alloy - Inner Bearing Type: Igus LL-glide bearing - Max Rider Weight: No restriction - Outer Bearing Type: Enduro cartridge bearing - Q-factor: 52mm - Release Angle: 15° / 20° - Spindle Material: Forged scm 435 chromoly steel - Spring Material: 300 series stainless steel - Warranty: 5 years - Weight: 320g per pair - Wing Material: 17-4PH stainless

The Comp version of Ritchey's world-beating Paradigm pedal has been redesigned from the ground, up. New engagement system provides best-in-class entry and release and excellent mud-shedding characteristics. The revamped axle system offers even greater bearing life, and a wider body improves stability. - Body: cast alloy - Axle material: CroMo - Inner bearing: ball bearing - Outer bearing: ball bearing - Float: 4° - Distance crank-to-center: 52.5mm - Pedal stack height: 17.1mm - Sold as a pair - Cleats included - Weight: 331g

The KEO GRIP cleats closely resemble the KEO CLEAT model, yet they boast the added feature of a TPU layer on the shoe side which prevents the risk of cleats sliding on carbon soles. Their anti-slip surface on the pedal side offers extra safety and stability when walking. - Use: Road - Material: Polyamide + TPU - Lateral adjustment: 4mm - Longitudinal adjustment: 9mm - Weight (pair + fasteners): 68g

The Twisted Pro pedal features a larger body shape, slimmer height and more concave. - Loose-ball bearing

A nylon evolution of DMR's V12 body design. Equipped with the same concave footprint and narrow profile DMR pedals are known for, while spinning on a Dual DU bushing system to provide the value of a plastic pedal with a thoughtful approach to increased durability. - Chromoly axle - Dual DU bushing system - Full-length 6mm off-road pins for added grip

The Thermalite pedals feature a concave, low profile design and are molded with Thermalite nylon material. - Micro knurling with 24 pins for traction - Recessed end to prevent damage to bearing cover - Chromoly spindle with 6mm broach and 15mm wrench flats - Weight: 391g - Pedal Body Material: Composite/Plastic

Get ready to fly high with the Krypto DH pedals. Built tough with its CNC'ed aluminum body and self-lubricating bushings, this pedal makes a big statement on the trail with full laser graphics and premium finish. Ten strategically placed pins keep you in maximum control. - Body: CNC-machined 6061 Aluminum - Axle: CNC-machined Cro-Mo - Bearings: Ultralight self-lubricating sealed bushings - Replaceable pins - Size: 117mm x 110mm - Weight: 208 grams (each) - Dimensions: 11 x 20 x 7 cm

Crank Brothers' 5050 Pin Kit includes 40 8mm-long steel pins that let you customize the traction on your 5050 or Mallet pedals. Thread lock is pre-applied to every pin.

Wolf Tooth Waveform Aluminum Pedals are designed for all-mountain riding, from XC to downhill. They are engineered to lock in your foot with a shape that matches your shoe, rear-loading pins for grip, and a dual-concave profile to further cradle your feet. The pedals come in two sizes, and are proportionally scaled to provide a supportive platform shaped to match the footprint of your shoe. Large is 112mm x 106mm, small is 105mm x 99mm. Dual-Concave Profile: - Waveform pedals are 14mm thick on the perimeter and just 12.5mm thick in the center. This profile cradles your foot, front to back and side to side. Extra Grip: - Each side of the pedal has 11 stainless steel rear-loading pins for loads of traction. An additional six pins ship with each set of pedals and they are available as replacement parts. Shaped with Purpose: - The shape of Waveform Aluminum Pedals matches the footprint of your shoe Reliable Performance: - Three low-friction, fully sealed cartridge bearings and one igus bushing with a custom radial seal protect internal components against trail debris for riding in all conditions. Tapered Edges: - Large, tapered leading edge to deflect pedal strikes on rocky, rooty terrain Two sizes: - Large: 112mm x 106mm - 384g - Small: 105mm x 99mm - 373g Each size is proportionally scaled to match the silhouette of your shoe based on foot size or pedal size preference.

- Easy step in, easy step out - Lighter spring tension optimized for beginner riders - Larger entry target for easier engagement - Cascaded features from top-tier systems - Extra-wide platform transfers pedaling power efficiently - Durable stainless steel body plate reduces flex and pedal body wear - Sealed mechanism - Single Sided Binding - Cartridge axle - Cleat retention adjuster - Average weight: 320g - Road clearance: 30 - Cleat included: SM-SH11 - Optional cleat: SM-SH10, SM-SH12 - Pedal Type: Road

PD-R7000 NEW FEATURE - Carbon fiber reinforced resin pedal body - Wide contact area - 265g/pr (25g/pr lighter than PD-5800) BENEFIT - Optimum power transfer - Lightweight - Aerodynamic image - Color: CFRP - Average weight: 265 g - Road clearance: 31° - Binding: Single Sided - Cleat included: SM-SH11 - Optional cleat: SM-SH10 / SM-SH12 - Pedal Type: Road - Reflector: SM-PD65

Replace worn-out spindles or customize your stance width, with these kits for iSSi Road pedals. - Chromoly spindles - Sealed cartridge bearing and bushing in an alloy cartridge - Compatible only with iSSi Road pedals - Installs with iSSi Road spindle tool (TL5499) - Pedal Spindle: 9/16" - Spindle Material: Chromoly Steel

- Oversized plastic platform with tread - Chromoly spindle - Includes toe straps - 873g pair (9/16")

- Extends pedals - Not for use on exercise bikes

- Set of 44 total replacement steel pins for vault pedals - Run threads-out for maximum traction or flip the pins to heads-out for less grip - 16 Short pins (for use in the center) overall length 8.5mm, stud is 4.5mm - 28 Long pins (for use in the outside edge) overall length 12.5mm, stud is 4.5mm - Use either a 5mm spanner or the included 2mm hex wrench to secure/remove

The Blade Kit for the Keo Blade Carbon range is compatible with ceramic and Ti models. It allows you to replace the original blade or change the tension of your pedals to fit your requirements. 3 different tensions are available: 12 for standard use, 16 for sprinters and a recommended 20 for track cycling.

Stay fully planted as you smash the mountain. The lightweight Smash pedal offers uncompromising performance with its strategically placed pins and bulletproof, extended axle design. - Body: Reinforced Premium Thermopoly - Axle: CNC-machined Cro-Mo - Bearings: Ultralight, self-lubricating sealed bushings - Replaceable pins - Size: 113mm x 114mm - Weight: 180g (each)

Traditionally, mountain cleats have only had two material options. Mild steel and brass. This has largely been to ensure that the cleat wore out faster than the pedal interface, but has left us with cleats that are often times very fast wearing, and in all cases, are quite heavy. Enter 6/4 Titanium, only slightly less hard than tool or spring steel used in the pedals, it's a remarkable 2.25 times stronger and 3 times tougher than brass or mild steel. Best of all, the extreme toughness and abrasion resistance of 6Al/4V titanium means that you can expect 300-400% wear life compared to traditional materials. Now we couldn't just stop there, but by combining 3D printing technology with this material that is 1/3 lighter than steel, we are able to achieve a cleat with internal lattice structure (called a gyroid) which maintains stiffness and strength while reducing weight to create a cleat set that is HALF the weight of a standard cleat set. This savings of 25-30 grams per set of cleats is significant over time, particularly in CX events where running is crucial. 25gm reduction x 100 rpm = 180kg of mass not lifted per hour of riding, 90kg per leg!

Dimension Toe Straps. - Durable metal buckle - Multi-purpose strap can also be used as a lash strap for bike touring or rear rack (caution: must be used to keep the strap tail out of the wheel) - 440mm length

A wide flat pedal with wicked grip, 45NRTH's Heiruspecs deliver supreme contact with the bottom of your traditional winter boots. The big CNC-extruded body provides a massive footprint and 16 alloy pins spread across the concave body to provide the ultimate grip. Sealed DU bearings keep them spinning smooth and replacement pin kits are available (sold separately) in seven different colors so you can color-coordinate your rig. - Size: 110mm wide x 100mm long x 18mm high - Spindle diameter: 9/16-inch - Weight: 352 grams